COMPLETE DILO GEOTEXTILE NEEDLEPUNCHING LINE WIDTH 700 CM Y

Description

COMPLETE  DILO GEOTEXTILE NEEDLEPUNCHING LINE WIDTH 700 CM YEAR 2015

 

Dilo Geotextile Needlepunching Line

Manufacturer: Dilo

Model: Di-Loom Od-Ii Ab 70

Year 2015
Working Width 7.000 Mm
Application Geotextile Nonwoven

Fibre Types Pp, Pes
Fineness 6,7 Dtex
Fibrelength 75-90 Mm
Consisiting Of:

1 Spinnbau Card Feeding Unit (Dosing Unit, Type Donz)
Working Width 1600 Mm, Height 6,43 M
Pre-Opening With 2 Infeed Rollers And 1 Tambour (Party Pinned)
Pre-Opening With 2 Infeed Rollers And 1 Tambour (Compl. Pinned)
Dimensions Of The Chute Feed 1,6 M(W)X 3,5 M (H)X 0,8 M Depth
Lap Guard For Upper And Lower Module
1 Conveying Fan, Type Fvty With 11 Kw Capacity
1 Card Feeder, Type Frs-P
Working Width 3200 Mm
With Air Guide Combs For The Lateral Distribution Of The Fibre Flow
1 Feed Roller, 1 Opening Roller, 1 Undercasing
Horizontal Transport Apron With Level Control By Ultrasonic Units
Spiked Lattice System With Back Stripping Rollers
Vibration Chute With Delivery Apron
1 Belt Weighter, Type Me 2
Weighing Unit With Load Cells And Belt, Transfer Roller Dia. 213 For
Material Transport

1 Spinnbau Carding Machine
Type Vector-Quadro-Card-Vqc 4 -Q 5 Pp (High Capacity)
Working Width 3,2 M
Over Head Feed Plate Intake:
1 Feed Roller 412 Mm Dia, Licker-In 550 Mm Dia.
Breast Cylinder:
1 Opening Roller 1050 Mm Dia.,
1/1 Worker/Stripper 159/159 Mm Dia.
3/3 Worker/Stripper 213/159 Mm Dia.
Top Transfer:
1 Doffer 292 Mm Dia.
1 Transport Roll 213 Mm Dia.
Bottom Transfer:
1 Doffer 412 Mm Dia.
1 Transport Roll 412 Mm Dia.
1 Wind Roller 159 Mm Dia.
Card:
1 Main Cylinder 1500 Mm Dia.
5/5 Workers/Strippers 213/159 Mm Dia.
1 Top Doffer 550 Mm Dia.
1 Bottom Doffer 708 Mm Dia.
Upper Doffing:
1 Pair Of Delivery Rolls 159/213 Mm Dia.
Lower Doffing:
1 Pair Of Delivery Rolls 159/213 Mm Dia.
Web Transport
Upper Doffing – Mesh Conveyor Partly With Suction
Lower Doffing – Mesh Conveyor Partly With Suction
2 Web Guide Rolls 223 Mm Dia.
1 Card Foundation, Length 15.3 M, Height 272 Mm
With Platforms And Railings

1 Dilo Batt Weigth Control System
Type Dilo-Profiline Cv1 A
Web Forming Technology For High Regularity Of Area Weight
Hard And Software For Regulation Working Width 3000 Mm
Without Weight Measuring System

1 Dilo Layer
Type Dilolayer, Dlsc ”Vector” 200 30/70
Max. Web Infeed Width 3000 Mm
Max. Laying Width 7000 Mm
Max Height Of The Web 450 Mm
Infeed Speed Max. 200 M/Min.
With Antistatic Synthetic Belts
Layer Regulation For Lay Down Carriage And Upper Carriage As Well
As Speed Regulation For The Aprons By Highly Dynamic Servo Drives
No Thick Batt Edges
Mechanical Web Guide Installed At The Deviation Point Of The
Upper Carriage
Siemens Sinamics S120 With Drive Cliq Bus-System
Plc Control, S7 With Operater Panel, Type Pls

1 Dilo Needle Loom
Type Di-Loom Od-Ii Ab 70
With Compressive Batt Feeder, Type Cbf 70
1 Feeding Apron, 1 Pre-Compression Apron
1 Pair Of Feeding Rollers With Ac-S Drives
Installed On Vibration Dampers
Needling System – From Top By 2 Needle Boards
Max. Working Width 7.000 Mm
Width Of Needle Boards 305 Mm
2 X 7167 Needles Per Meter Working Width
Beam Stroke 60 Mm
Max. Stroke Frequency 1000 Rpm
2 Sets ( 4 Needle Boards W/O Needles Incl.)

1 Dilo Surface Winder
Type Sw 70
Max. Working Width 7000 Mm
For Winding And Winding-Up Needle Felted Material
Incl. Acs Drive